Fall Cross DTF Single Transfer ONLY

Preparation and Alignment

• Lint roll the garment area to clear away invisible loose fibers.

• Pre-press the fabric for 5 to 7 seconds to remove wrinkles and trapped moisture.

• Align the DTF transfer print-side down against the garment. [1, 2, 3, 4, 5]

Heat Pressing the Design

• Set temperature to 300°F–325°F for cotton/blends, or around 280°F for polyester.

• Apply firm, heavy pressure for 10 to 15 seconds.

• Cover with a teflon or parchment sheet if desired to protect the platen. [1, 2, 3, 4, 5]

Hot Peeling the Film

• Peel immediately right after the press opens while the film is still hot.

• Pull fast and smooth like a band-aid at a low diagonal angle without stopping or hesitating.

• Note: If any ink resists or sticks to the film, stop, lay it back down, and press for a few more seconds before trying again. [1, 2]

Final Curing Press

• Cover the design with parchment paper (for a matte look) or a teflon sheet (for a glossy look).

• Repress the garment for 5 to 10 seconds to lock the fibers and increase wash durability. [1, 2, 3]

Due to the many variations in monitors, colors may appear differently in the finished product. We can not guarantee that your products will be 100% accurate from order to order or to the colors you see on your computer or phone screen. We do our best to keep all settings repeated for each batch but please allow for some variances to occur.

Adult Transfer Size: 11.5" wide or up to 12.5" tall for more narrow designs.

Youth Transfer Size: 8" Wide or up to 8.5" tall for more narrow designs.